DEWALT DCD709C2 20V MAX ATOMIC Brushless Compact 1/2" Hammer Drill/Driver Kit — 6.9" Long, 340 UWO, 2 Batteries + Bag
Masonry capability in a drill short enough to work inside a stud bay, kitted and ready to go.
At 6.9 inches front to back and 2.5 lbs bare, the DCD709 fits where a full-size hammer drill has to be angled in — and it still sets anchors in brick, block, and mortar. The brushless motor delivers 340 UWO through a two-speed transmission: 0–450 RPM for controlled driving, 0–1650 RPM for drilling, and 28,050 BPM in hammer mode.
Fifteen clutch settings give repeatable torque so cabinet screws seat consistently instead of stripping out. The 1/2" ratcheting chuck grips smooth shanks securely when a bit binds. An LED at the foot lights the work surface rather than shining into your eyes, which is what you want in a mechanical room or panel box.
Two batteries mean one charges while the other works, and both run every tool on the 20V MAX platform. The handle is balanced for one-handed overhead work, and the belt hook is removable.
Set expectations on the hammer function. This is a compact hammer drill, not a rotary hammer. It handles 3/16" to 1/4" holes in brick and mortar cleanly — tapcon pilots, conduit clip anchors, light fixture mounts. It'll manage small anchors in cured concrete with patience. If you're routinely drilling 3/8" or larger in slab, an SDS-Plus rotary hammer is the right tool.
DEWALT 20V MAX ATOMIC Compact 1/2" Hammerdrill/Driver with 2 Batteries and Bag
Specifications
Own Brand
