Our two standard and most popular stucco finishes allow for ease in application, ideal for any type of project. These Trowel finishes consist of granulated quartz or marble, pigment, resin and other additives made for both exterior and interior use.

Other finishes are special order, available upon request

Marble Fine

Marble Coat
 

Stucco Inspiration

Durock Exterior Wall Systems- PUCCS

PUCCS NC (NON-COMBUSTIBLE) CLADDING

• 10mm deep air space required

• Fastened to structure using DuROCK’s liquid applied WRB’s and mechanical fasteners.

• Marked 4" pinpoints for ease of stud location.

• Double reinforcing meshes

• Controlled air leakage

PUCCS EIFS FOR COMMERCIAL AND HIGH RISE

• Has a Geometrically Defined Drainage Cavity (GDDC) that is 37% open and 10mm deep

PUCCS EIFS FOR RESIDENTIAL AND LOW RISE

• Has a Geometrically Defined Drainage Cavity (GDDC) that is 37% open and 10mm deep

PUCCS EIFS FOR INSULATED CONCRETE FORM (ICF)

• Has a Geometrically Defined Drainage Cavity (GDDC) that is 37% open and 10mm deep

Durock Exterior Wall Systems- InsulROCK

INSULROCK/COMMERCIAL & HIGH RISE CONSTRUCTION

• Moisture control is provided through the use of a secondary barrier, also helping control air leakage

• Works well to clad any size building

• Non-wood substrate use advised

• Superior strength and adhesive from the Polymer-enhanced, fibre-reinforced base coat

• Polymer-based finish 

DUROCK STUCCO PLUS RS RAINSCREEN SYSTEM

• Supporting construction is separated from the cladding system using wood strapping creating a drained air space

DUROCK STUCCO PLUS FOR MASS WALL SUBSTRATES

• Metal lath is not needed when installed over concrete or masonry as long as the surface is completely clean of everything including oil or wax

• Substrate must be covered in DuROCK Jewel Stone Primer before any base coat application

• Meant for a ventilated, unheated space, that has steel frame, soffit and canopy assemblies.

• Can be applied over concrete

EIFS and Stucco product information- Wall Components

EIFS and Stucco product information- Barrier Coats

Vapour Block

Roller Bear

Polar Bear

Cement Bear

EIFS and Stucco product information- Leveling Coats

One Step Ready Mix

This mixture of Portland cement, silica sand, and dry-resins makes a leveling coat for conventional stucco, concrete and masonry substrates

B.i.g Extra

B.i.g Extra is for your cast in place concrete. Just add water to your mix to cover any blemishes such as colour variations, cold joints, and minor cracking

EIFS and Stucco product information- Base Coats & Adhesives

B2000

Prep Coat

Prep Coat Plus

Prep Coat D

Prep Coat Q

Perfect Parge

Prep Coat NCP

For additional information on DuROCK, including downloadable brochures, product directories and more- please visit their website at:

https://durock.ca/