The tool that cuts the outlet hole after the board is already on the wall. Mark your box, plunge, ride the edge, and the opening comes out clean and square without measuring twice or cutting the sheet on sawhorses first.

Five amps at 30,000 RPM is the most motor in a cut-out tool, and it shows on the work that bogs down lighter units — double board, window returns, cement board, tile. The bit clears material instead of burning through it, which means less heat, less wander, and cleaner edges on the cut.

Tool-free bit changes matter more than they sound on a tool like this. Cut-out bits are consumables — they dull, they snap, and you'll change them several times in a day of hanging. No wrench, no lost collet nut on a dusty floor.

The turn-on/bump-off switch lets you kill the tool with the heel of your hand while both hands are still committed to the cut. That's a safety feature disguised as a convenience.

The dust-sealed switch is what makes this tool last on drywall work specifically. Gypsum dust destroys unsealed switches — it's the failure point on cheaper cut-out tools, and sealing it is why this one is still on jobsites decades after its introduction. Jam-pot construction handles the rest of the abuse.

Both 1/8" and 1/4" collets are included, so it takes the full range of cut-out and spiral bits. A slim body and 3.2 lb weight keep it manageable overhead, and an adjustable guide plus spindle lock round it out.