Description
FAST THERMAL BRACKET™ offset shelf angle support is our proprietary structural, thermally-broken shelf angle support system, allowing for continuous insulation behind the shelf angle. This system offsets the shelf angle from the structural backing and positions the shelf angle to remain fully outboard of the insulation. Our FAST Thermal Brackets have a proprietary hole pattern in the flanges to reduce overall thermal transmittance through the bracket without compromising load capacity. FAST Thermal Bracket can be manufactured in any size to accommodate all cavity widths.
The FAST Thermal Bracket System is often used with a 4″ x 4″ x 1/4″ (100 x 100 x 6 mm) angle which is readily available from local suppliers, and much less expensive than using larger and non-standard angles. FAST Thermal Brackets eliminates the need for large angles that are prohibitively expensive, difficult to install and create a substantial thermal bridge.
Used in over 1,700 buildings in North America, FAST Thermal Brackets have been thoroughly tested and proven in the field. FAST Thermal Brackets can used to support dead load from Masonry Veneer, Thin Granite Veneer, Pre-Case Concrete and Large Stone Panels.
Specifications
Own Brand
Install Material & Tools
